Packaging Includes: Upper arms-4pcs Lower arms-4pcs CVD-4pcs Aluminum 7075-T6 hex adapter-4pcs Aluminum 7075-T6 wheel lock-4pcs Turnbuckle-2pcs Stainless steel pin 4x33-4pcs Stainless steel pin 4x43-4pcs Stainless steel flat head screw 3x8-12pcs Stainless steel washer 3m-12pcs ...Packaging Includes: Upper arms-4pcs Lower arms-4pcs CVD-4pcs Aluminum 7075-T6 hex adapter-4pcs Aluminum 7075-T6 wheel lock-4pcs Turnbuckle-2pcs Stainless steel pin 4x33-4pcs Stainless steel pin 4x43-4pcs Stainless steel flat head screw 3x8-12pcs Stainless steel washer 3m-12pcs Stainless steel pin 4x38.5-4pcs Stainless steel pin 4x63.5-4pcs White delrin shim 4mm-2pcs Stainless steel round head screw 3x20-2pcs Stainless steel round head screw 3x18-6pcs Set screws 5x5-4pcs 8x16x5 bearing-4pcs 2.5x14.8 Pin-4pcs M4x2.5x17 Screw pin-4pcs Original Name / Part No: 8929+8930+8950+8956+8948 Part Location: F&R upper+lower arms,cvd,hex adapter,wheel lock,steering tie rod Does this product replace a specific part or function? Yes Product major function & usage: These parts are made to widen the wheelbase for better stability of the chassis Major advantages of upgrading to this product: 1. Made with a quality light weight high tensile strength aluminum 6061 T6 for greater support and durability. 2.
Delrin collars are inserted to minimize the gap and strengthen the fitting for a smooth and stable drive. 3. The screw fixing method has changed to fixing a pin and with small screw to avoid any damage by loose threads on screws.
4. White Delrin Shim 4mm x 2pcs are used to lower the gap during installing on rear side, since the gap on rear arms are slightly wider than front arms. 5.
Multiple positioning holes for dampers to adjust the angle. 6. Adjusting the length of the suspension and the angle of the wheels, so that they can be more suitable for different ways of racing.
7. The design has upgraded from cross head design to CVD swing joint for stronger power transmission. 8.
Harden steel joint with alloy 6061 T6 body combination, with axle increased from 6mm to 8mm for stronger and more powerful use but maintain light in weight. 9. Adjustable design with better suspension and durability.
10. These parts are made to become 20MM wider on each side to widen the wheelbase for better stability of the chassis. Note: Due to the thickened axle, the bearings have also changed, suitable bearings are provided in the accessories.
Suitable Model: TRAXXAS-1/10 4WD MAXX MONSTER TRUCK -89076-4 TRAXXAS-1/10 4WD MAXX W/WIDE MAXX MONSTER TRUCK-89086-4